• Use a 0-1800 RPM variable speed corded or 18V cordless drill. Install fastener perpendicular to deck, decreasing drill speed as the screw head nears the top of the board. Slowly drive the screw flush. DO NOT OVERDRIVE.
• Install two screws at every joist.
• When fastening within 1 ½” from the end of the board, follow the standard building practice of predrilling a 3/16" diameter pilot hole. This will prevent the board from splitting.
• Install screws no closer than 3?4" from the edge of the board.
• Occasionally when working with dense composites or in cold weather, a raised outer edge may appear around the screw head. If this occurs, simply make a 1/16" to 1/8" dimple in the top surface of the board using a standard 1/4" drill bit prior to installing the TrapEase. It is not necessary to predrill through the composite board.
• Do not use TrapEase to attach composite decking to fixed surfaces such as roof decks, sleepers, solid wood surfaces, or existing wood decking. The composite should always be free to expand and contract as temperatures vary.
• Stainless steel screws are recommended when attaching composites over fixed surfaces, where airflow beneath the deck is restricted, when affixing hardwoods as your decking or using non-wood joist systems. Warranty may become void if these installation instructions or those of the decking manufacturer/supplier are not followed.
